MOSHE 3000
FLEX WHITE
Single-component waterproofing coating for existing slabs and walls with infiltration and moisture problems, with the possibility of pigmentation in different colors.
BENEFITS
Sustainable
MOSHE 3000 FLEX WHITE was developed with nanotechnology, 100% inert minerals, and water-based acrylic resins. It has tested and proven hydrophobic properties, recognized as the best technical solution on the market for the repair and prevention of waterproofing defects in walls, floors, and slabs.
Why choose
MOSHE 3000 FLEX WHITE?
Technological, durable, and sustainable — see why you should choose MOSHE 3000 FLEX WHITE.
Advantages of using MOSHE 3000 FLEX WHITE
Application on slabs and walls.
-
Developed with nanotechnology, 100% inert minerals, and water-based acrylic resins.
-
It has tested and proven hydrophobic properties, recognized as the best technical solution on the market for the repair and prevention of waterproofing defects in walls, floors, and slabs.
-
It is a flexible product that creates a surface protection layer, providing high waterproofing performance and sealing cracks and fissures even with minor movements and expansions.
-
It can be pigmented in other colors.
-
It is a single-component liquid waterproofing product, providing great ease and speed of application. It offers high durability, as it is composed of inert minerals. It comes ready for use and is easy to apply—simply open the bucket and mechanically mix for 2 minutes before application.
-
Creates a protective film, sealing all pores, fissures, and cracks in walls, floors, and slabs. It delivers excellent performance under both positive and negative water pressure acting on the surface, ensuring outstanding waterproofing, in addition to resistance against ultraviolet (UV) rays.
-
5-year warranty in accordance with performance reports validated by third-party laboratories, except in cases of design flaws, structural failures, or improper use of the material.
Gallery of MOSHE 3000 FLEX WHITE
Craça das Águas Condominium
East Zone - São Paulo - SP
Villare School
São Caetano do Sul - São Paulo - SP
Luxury House
Barra da Tijuca - Rio de Janeiro - RJ
Frequently Asked Questions
the most common questions about MOSHE 3000 FLEX WHITE
Internal and external walls and/or those in contact with ground moisture;
Rigid pavements, special engineering structures and common structures, sidewalks, precast concrete elements in general;
Swimming pools, reservoirs, cisterns, water tanks, galleries;
- Concrete roofs, fiber cement and ceramic tiles;
Wood materials such as fences, fence posts, plywood (formwork panels), and boards.
The product coverage is up to 3.78 m²/L per coat, depending on the roughness of the applied surface. The more porous the surface, the lower the coverage. If a reinforcing mesh is used, the average coverage is up to 3.45 m²/L per coat.
3 coats: exposed slabs and roof tiles
2 coats: other areas
Product certified by HBC (Healthy Building Certificate) as a qualified and certified product that poses no risk to human health or the environment, and is therefore a healthy and sustainable product.
According to the SGS USA Report of Product Testing – Interim Product: MOSHE 3000 FLEX, Lab No.: 22-551, it was verified in the ASTM C1583 – Bond Strength to Concrete test that the product withstood a pressure of 100 Psi in tests conducted after 7 and 28 days of curing. In the ASTM D6904 – Wind-Driven Rain test, the product withstood water spray for approximately 24 hours, with water applied at a rate of 60 to 70 gallons per hour and at 5 inches of water pressure (equivalent to dynamic pressure at a wind speed of 98 mph), with no water penetration observed. In the ASTM E96 – Water Vapor Transmission test, conducted at a temperature of 73.4 ± 2°F and relative humidity of 50 ± 2%, a Water Vapor Transmission rate of 3.7 perms (20 mil WFT) was recorded at 28 days.
According to IPT Test Report No. 1 131 867-203, in tests carried out in accordance with ABNT NBR 10.787 – Water penetration under positive pressure, no water penetration was observed in the test specimen after applying a pressure of (0.10 ± 0.01) MPa for 48 hours, followed by a pressure of (0.25 ± 0.01) MPa for 24 hours. According to ABNT NBR 10.787 and 11.905 – Water penetration under negative pressure tests, the product proved watertight up to a pressure of at least 0.10 MPa for 48 hours. In accordance with ABNT NBR 12.171 – Tensile bond strength (minimum), the product demonstrated an average strength of 3.8 MPa, significantly exceeding the standard requirement of at least 0.5 MPa. According to ABNT NBR 7462 – Elongation at break (minimum), the product achieved 3%, and Elongation at break after aging (minimum) reached 5%, exceeding the typical concrete expansion of 0.03%.
According to IPT Test Report No. 1 140 327-203, in tests conducted in accordance with ASTM D2369-20 – Standard Test Method for Volatile Content of Coatings (IPT Procedure 6806 – Rev. 8), ASTM D4017-22 – Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method, and United States Environmental Protection Agency (USEPA) Method 24 – Determination of Volatile Matter Content, Water Content, Density, Volume Solids, and Weight Solids of Surface Coatings (method for water-based coatings), it was verified that the non-aqueous volatile content (g/L) of MOSHE 3000 FLEX is 19.3 g/L, which is far below the limits required by LEED Certification of the USGBC, which according to South Coast Air Quality Management District (SCAQMD) Rule 1113, effective June 3, 2011, is 400 g/L.