MOSHE 3000
FLEX
Single-component waterproofing product for slabs, floors, walls, and existing reservoirs with infiltration and moisture issues.
BENEFITS
Sustainable
Developed with nanotechnology, 100% inert minerals, and water-based acrylic resins, it features tested and proven hydrophobic properties, recognized as a leading technical solution in the national and international markets for the repair and prevention of waterproofing-related defects in walls, floors, and slabs.
Why choose
MOSHE 3000 FLEX?
Technological, durable, and sustainable — see why you should choose MOSHE 3000 FLEX.
Advantages of using MOSHE 3000 FLEX
Single-component waterproofing product for slabs, floors, walls, and existing reservoirs with infiltration and moisture issues.
-
It is a liquid, single-component waterproofing product, providing great ease and speed of application.
-
It offers high durability, as it is composed of inert minerals. It comes ready to use and is easy to apply—simply open the bucket and mechanically mix for 2 minutes before application.
-
Prevents water infiltration, increases the durability of the structure, and inhibits the growth of fungi and bacteria.
-
Creates a protective film, sealing all pores, fissures, and cracks in walls, floors, and slabs.
-
Delivers excellent results under both positive and negative water pressure acting on the surface, ensuring outstanding waterproofing performance, in addition to providing resistance against ultraviolet (UV) radiation.
-
Developed with nanotechnology, 100% inert minerals, and water-based acrylic resins, it features tested and proven hydrophobic properties and is recognized as a leading technical solution in both national and international markets for the repair and prevention of waterproofing-related defects in walls, floors, and slabs.
-
5-year warranty based on performance reports verified by third-party laboratories, excluding design defects, structural failures, or misuse of the material.
Main applications of
MOSHE 3000 FLEX
Single-component waterproofing product for slabs, floors, walls, and existing reservoirs with infiltration and moisture issues.
Frequently Asked Questions
the most common questions about MOSHE 3000 FLEX
Interior and exterior floors and walls and/or surfaces in contact with ground moisture
Basements, underground structures, and retaining walls
Rigid pavements, special structures and standard civil structures, sidewalks, and precast concrete elements in general
- Swimming pools, reservoirs, cisterns, water tanks, tunnels and galleries, and diaphragm walls
Concrete slabs and fiber cement roofing sheets
Wood elements such as fences, fence posts, plywood formwork panels, and boards
The average product coverage is 3.78 m²/L per coat, depending on the roughness of the applied surface. The more porous/rough the surface, the lower the coverage. If a reinforcing mesh is used, the average coverage is up to 3.45 m²/L per coat.
3 coats: Water tanks, swimming pools, retaining walls, and floors in contact with soil
2 coats: All other areas
Product certified by HBC (Healthy Building Certificate) as a qualified and certified product that poses no risk to human health or the environment, and is therefore considered a healthy and sustainable product.
SGS USA – Report of Product Testing Report – Interim
Product: MOSHE 3000 FLEX
Lab No.: 22-551
In the ASTM C1583 – Bond Strength to Concrete test, the product withstood a pressure of 100 psi in both the 7-day and 28-day curing tests.
In the ASTM D6904 – Wind-Driven Rain test, the product resisted water spray for approximately 24 hours, with water applied at a rate of 60 to 70 gallons per hour and at 5 inches of water pressure (equivalent to dynamic pressure at a wind speed of 98 mph), with no water penetration observed.
In the ASTM E96 – Water Vapor Transmission test, when tested at a temperature of 73.4 ± 2°F and relative humidity of 50 ± 2%, the Water Vapor Transmission – 20 mil WFT (perm) was 3.7 at 28 days.
IPT TEST REPORT No. 1 131 867-203
According to ABNT NBR 10.787 – Water Penetration under Positive Pressure, no water penetration was observed in the test specimen after applying a pressure of (0.10 ± 0.01) MPa for 48 hours, followed by (0.25 ± 0.01) MPa for 24 hours.
According to ABNT NBR 10.787 and ABNT NBR 11.905 – Water Penetration under Negative Pressure, the product remained watertight up to a pressure of at least 0.10 MPa for 48 hours.
According to ABNT NBR 12.171 – Pull-Off Adhesion Strength (minimum), the product demonstrated an average adhesion strength of 3.8 MPa, significantly higher than the standard requirement of at least 0.5 MPa.
According to ABNT NBR 7462 – Elongation at Break (minimum), the product achieved 3%, and Elongation at Break after Aging (minimum) reached 5%, both exceeding concrete expansion, which is approximately 0.03%.
IPT TEST REPORT No. 1 140 327-203
According to ASTM D2369-20 – Standard Test Method for Volatile Content of Coatings (IPT Procedure 6806 – Rev. 8), ASTM D4017-22 – Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method, and United States Environmental Protection Agency (USEPA) Method 24 – Determination of Volatile Matter Content, Water Content, Density, Volume Solids, and Weight Solids of Surface Coatings (water-based coating method), the non-aqueous volatile content (g/L) of MOSHE 3000 FLEX was verified at 19.3 g/L, which is significantly lower than the limits required by USGBC LEED Certification. According to South Coast Air Quality Management District (SCAQMD) Rule 1113, effective June 3, 2011, the limit is 400 g/L.