BENEFITS
Sustainable
Water-based, solvent-free water repellent with long service life and rapid development of water repellency. It maintains the surface’s natural appearance and provides a highly durable and effective “beading” effect, while posing no health risks, preventing mold and bacteria caused by moisture, and being resistant to UV rays.
Easy application
It comes ready to use and is easy to apply—just shake the product for 2 minutes before application. Only one coat is needed for both vertical and horizontal surfaces, and it should be applied without excess or gaps. The product also helps reduce efflorescence and freeze–thaw cracking, provides good adhesion for acrylic paints, and allows the substrate to breathe.
Why choose
MOSHE 3000 REPEL?
Technological, durable, and sustainable — see why you should choose MOSHE 3000 REPEL.
Advantages of using MOSHE 3000 REPEL
Application on heavy clay products and porous mineral substrates.
-
Water-based, solvent-free water repellent with long service life and fast development of water repellency.
-
Maintains the natural appearance of the surface and provides a durable and effective “beading” effect.
-
Poses no health risks, prevents the formation of mold and bacteria caused by moisture, and is UV-resistant.
-
Ready to use and easy to apply. Just shake the product for 2 minutes before application. One coat is recommended for vertical or horizontal areas, avoiding gaps or excess product.
-
Reduces efflorescence and cracks caused by freeze-thaw cycles.
-
Offers good adhesion to acrylic paints and allows the substrate to breathe.
-
Backed by a 3-year warranty supported by performance reports issued by third-party laboratories, except in cases of design flaws, structural failures, or misuse of the material.
Main applications of
MOSHE 3000 REPEL
Application on heavy clay products and porous mineral substrates.
Frequently Asked Questions
the most common questions about MOSHE 3000 REPEL
Heavy clay-based products:
Bricks
Clay, concrete, fiber cement, and ceramic roof tiles
Porous mineral substrates:
Concrete blocks and walls
Unpolished marble or granite walls
Monuments and sculptures
The product yield is up to 10 m²/L per coat, depending on the roughness of the applied surface. The more porous the surface, the lower the yield.
Single coat only
Product certified by HBC (Healthy Building Certificate) as a qualified and certified product. It does not pose any risk to human health or the environment, therefore being a healthy and sustainable product.
According to the SGS USA Report: Report of Product Testing – Interim Product: Moshe 3000 Stone Lab No.: 22-1808, it was verified that in the ASTM D6904 – Wind-Driven Rain test, the samples were attached to a test chamber and exposed to water spray for approximately 24 hours. The water was sprayed at a dynamic pressure equivalent to winds of 98 mph. At the conclusion of the test, no visible signs of leakage or any visible saturation of the tested blocks were observed.